Feeds:
Posts
Comments

Shopcam: Winery Exhibit

We had an inquiry here about the construction of one of the tables Rick made for the various shows in the valley, and it made me realize I had never posted pictures of the two pieces he finished for our exhibit at the Lost River Winery tasting room in Winthrop.

Entry table with Western Bigleaf Maple live-edge top and shelf, and East Indian black walnut legs:

DSC_6889

DSC_6904

The legs on this piece were done a little differently than on the bench and small table shown in a previous post.  On those, the maple legs were formed in a V-shape using 2 pieces of wood at each end.  For this entry table, he used black walnut; the end pieces are single pieces of wood and are angled so as to make a parallelogram, with a shelf connecting them.

He also made a lovely little wine cabinet out of clear vertical grain (CVG) fir:

DSC_6874-2

All photos were taken by Teri J. Pieper – Reflected Light Images.

Last week I finally got around to making a flyer for our exhibit to post around the valley.  If you are here visiting, come by the tasting room – it will be there until mid-September.

WW&W flyer

Powerless

There was a fire over the Loup on the Omak side yesterday, and they “de-energized” the transmission line to the Methow Valley at 2:30 yesterday afternoon.   Here’s a link to the brief report on the Methow Grist this morning.

The original estimates were that power would be out for 12-24 hours, depending on how quickly they could control the fire and how much damage was done to pole structures on the transmission line.  We got out the LED battery lanterns from our camping equipment, filled water containers (for drinking and flushing toilets) and got the Honda generator going.  We hadn’t run it in years and it had old gas in it, but fortunately, after some freshening-up, it started and ran fine.  This let us power the refrigerator, a few lamps, and even the TV and DVD player, so we could watch some Netflix after it got dark.  We may need to come up with a way to power the pump and pressure tank for our well in future, in case of an extended outage.

Anyway, we went to bed about 11 pm and left a bedside light turned on.  About 11:30 pm power came back on!

On a Roll with Rugs

I have been spending a lot of time weaving rugs the last couple of weeks, since returning from the weaving conference in Bellingham.  I used up the last of the warp I had on that loom doing these:

"Ruglets" R143 & R144

“Ruglets” R143 & R144

R145 - sold last weekend at Winthrop Gallery

R145 – sold last weekend at Winthrop Gallery

"Ruglets" R146 & R147

“Ruglets” R146 & R147

"Ruglets" R148 & R149

“Ruglets” R148 & R149

R150 - Pendleton wool shirting selvages

R150 – Pendleton wool shirting selvages

I am now working my way through my still rather large collection of Pendleton blanket and shirting selvages – trying to make some headway on using up materials I gathered at the mill outlets over the last several years.  When I don’t have much of something left, I am either working it into a full size rug along with other colors and textures, or making “ruglets”.  These are about 18″ x 30″ and I have found them useful around our house, at least, as hearth mats, bench mats, cat mats, small floor mats, or whatever.

Around July 1st I wound a new rug warp (about 47 yards) onto the sectional beam, and tied it on to the existing threading and pulled it through to the front beam.  No sleying and threading, I love it!  I also like the colors in the new warp.

rug warp June 2013

happiness is a new warp!

I had wound new warps for placemats (on Kingston the 32″ Macomber) and undulating twill towels (on Mother Mary’s loom, the 40″ Mac at the guild room) before leaving for conference.  Got the one for Kingston tied on, pulled through and wound onto the back beam, also the first week of July.  I am not sure when I will start actually weaving on these, but here is a picture with some of the fabrics I will be using:

placemat warp and fabrics ready for action

placemat warp and fabrics ready for action

Then it was back to rug weaving.  I am having a lot of fun combining different types and colors of the Pendleton selvages, and using up my stash in a creative way.  I finished these last week before leaving for the Coast on July 5th:

R151 - pretty much the same as R150 at the end of the previous warp

R151 – pretty much the same as R150 at the end of the previous warp

R152 - a small mat using up the last of these 2 colors

R152 – a small mat using up the last of these 2 colors

R153 - gray/teal shirting selvages alternated with bright "worms" at the ends

R153 – gray/teal shirting selvages alternated with bright “worms” at the ends

R154 - same approach, different colored "worms:

R154 – same approach, different colored “worms”

R155 - alternated with "worms" throughout, but changing colors

R155 – alternated with “worms” throughout, but changing colors

My rug numbers, by the way, (Rxxx) indicate the number of rugs I have woven since I bought my first loom about 6 years ago.  The woman I bought it from wove nothing but rugs, and she got me started.  That was all I did the first 6 months or so.

This week I finished three more, very similar to the ones I did back in June before weaving conference.

R156 - using same materials as R142

R156 – using same materials as R142

R157 & R158 - same materials as R140 and using up the last of it, too!

R157 & R158 – same materials as R140 and using up the last of it, too!

In between, we went to the coast to visit family & friends, and celebrate Rick’s 65th birthday.

Rick's 65th 1Rick's 65th 2

It’s been lovely here in the valley – we have had enough rain on and off to keep things relatively green.  There have been a couple of really hot spells (high 90’s) alternated with temps in the 80’s, thundershowers, etc.  We drove back into the valley last Sunday, coming over the North Cascades Hwy, to encounter a total downpour by the time we reached Winthrop!  By later that evening, however, the storm had moved off and it was back to warm and dry.

Tired But Happy

I got home yesterday afternoon after a week in Bellingham at the NW Weavers’ Conference.  What a week!  Western Washington University was the venue, and the grounds and staff were wonderful.  We were in dorm rooms (I opted for a single) so the accommodations were rather spartan, but the bed was comfortable and my dorm was quiet.

Tuesday through Thursday I took a 3-day pre-conference workshop with Kay Faulkner from Australia.  The title was “East Meets West:  Warp Faced Weaves”.  She had an article in the March/April 2013 issue of Handwoven magazine on Textiles of West Timor, including a project with sotis cloth, which was one of the types of patterns we were going to do.  Here is the workshop description:

“Most weavers look towards European and American weave structures for inspiration. Some real gems can be found in Eastern textiles. Warp faced textiles in SE Asia are usually woven on back strap looms but they often can be modified to suit multishaft looms. Analysis of ethnic textiles will provide some interesting additions of technique for the hand weaver. They include warp manipulation, warp wrapping, weft patterning on warp faced cloth. These techniques can then be combined with Western structures to achieve interesting cloth. Consideration will also be given to maximizing the potential of your loom while combining structures.”

It turned out the main effort in the class was designing your warp and getting it on the loom.  I decided to make an 8-inch wide piece, 4 yards long, so I could sample the techniques to be shown in class, and have enough left for 1-2 scarves.  Well, it took me almost 2-1/2 days to get the warp on the loom.  It is sett very closely so only the warp will show.  I was using 8/2 cotton, which means something to a weaver, and my sett was 60 epi (ends per inch).   8″ x 60 = 480 ends right?  Wrong.  It wasn’t until I started actually sleying and threading that I realized my fundamental error, in not taking into account the fact that you thread in pairs of 4 into 2 heddles – 2/2 for stripes in plain weave, 1/3 for the “Sotis” patterns.  So my 480 ends that I had labored over, keeping color order and all, was making a 16″ wide piece, not an 8″ wide piece!  No wonder it took me so long.  By the middle of the last day I was only this far:

sleyed, threaded and tied on - finallly!

sleyed, threaded and tied on – finally!

This was despite the fact I had spent 12 hours in the workshop room the first 2 days.  I was very tired and getting a little frustrated!  It also turned out it would have been much easier to warp the loom from back to front, but by the time she explained that, it was too late for the way I had wound the warp in my usual way for front to back.

On the third day of the workshop, she was demonstrating various techniques, so I tried to take notes and some pictures while she was doing it.  The workshop handout was brief and somewhat cryptic.  Fortunately, there were some women from Seattle Weavers Guild in the class, who were farther along than I was, so I also have some folks to go to with questions.  I did get started on the first set of patterns before we had to pack up on the last day.  And I am excited about my warp, I really like the colors and if I can work my way through the techniques, I should be able to make the rest of it into placemats.  So stay tuned for progress and pictures in the coming month.

Here are some pictures of workshop projects under way:

P1020741 P1020742 P1020743 P1020745 P1020746

Meanwhile, it was fun hanging out with my friends who had also come over for workshops, and meeting new people.  A number of people from the Methow Valley guild came over on Thursday for the actual conference, which includes 3 half-day seminars as part of the registration.  The fashion show on Thursday was fabulous, many wonderful garments, and beautifully presented with music.  These garments were moved to the Western Gallery in the Fine Arts building on campus, where the Instructor Show, Open Show, and Juried Show exhibits were also to be found.

So speaking of the Juried Show, I had two of my polychrome summer & winter scarves accepted for that show.  I had been pleased that the juror, Bhakti Ziek, had written some very nice comments on my entry forms when they came back to me.  Well, as it turns out, she also gave me an award!  Juror’s Choice 1st Place!

P1020756

and here is a picture my friend Deb took with her iPhone:

ANWG 2013 awardI took all three half-day seminars from Kay Faulkner as well, as they had sounded the most interesting when I registered back in January.  There were no handouts and lots of information, but I think I got enough of it to feed my brain and creative side for the next year or two.  Tied weaves, double weave (way beyond the basics) and loom-controlled shibori.

There was also a market with vendors big and small.  I behaved myself pretty well, but did come home with a few tools (including a used LeClerc electric bobbin winder) and some lovely alpaca from Vancouver Island, for future spinning projects.  Morrison Creek Alpacas, highly recommended.

Wine, Weaving & Woodwork

I am leaving tomorrow for a week-long weaving conference in Bellingham, WA.  It is the NW Weavers Conference 2013, sponsored by ANWG – the Association of Northwest Weavers Guilds.  I am taking a 3-day pre-conference workshop on Tuesday-Thursday, then the conference itself starts on Friday.  It included some mini-workshops (I signed up for 3 half-day workshops on Friday and Saturday) plus a whole slew of other events.  So I will file a report in a little over a week!

Meanwhile, here are some pictures of the three rugs I finished this week, plus some shots from our exhibit at the Lost River Winery tasting room in Winthrop.   It is on the North Cascades Hwy just west of Winthrop (26 Highway 20).  Hours for the summer: Thursday through Monday 11-5 pm.

Here are pictures of the three rugs I took in the studio before taking them up to the tasting room yesterday.  They are all woven with a mix of smooth (“wooly worm”) scraps and fringed selvages I get from the Pendleton Woolen Mill Store in Portland, OR.  I pretty much have to pick these out whenever we are down there, as you never know what they are going to get in from the mill in Pendleton, OR from week to week.  The “wooly worms” are just dumped into a big rolling bin, and I have to go “dumpster diving” (a very dusty affair) to pull out wads of the colors I like.  The fringed selvages come packaged in plastic bags, but as I said, you can’t predict what they are going to have at any moment in time.

R140

R140

R141

R141

R142

R142

and here are some pictures I took this morning up at the tasting room:

back wall behind the tasting bar

back wall behind the tasting bar

main wall to right of tasting bar

main wall to right of tasting bar

on the left as you enter the tasting room

on the left as you enter the tasting room

Rick's entry table from live edge Western Bigleaf Maple and East Indian black walnut

Rick’s entry table from live edge Western Bigleaf Maple and East Indian black walnut

Do notice the beautiful display hangers Rick made for me, using cherry, for both rugs (using drapery ring clips) and scarves.  They are suspended from the picture railings above with fishing line.   He will finish up the wine cabinet (in clear vertical grain fir) this week, so I will get a picture when I get back from conference!

Name That Trailer

Rick was calling the new/old Airstream”Moby Trailer” but I wasn’t really keen on that.  This past week, I have been referring to it as the “Mother Ship”.  But on the way over to Spokane yesterday, we came up with “Battletrailer Galactica”.  Probably too cumbersome, but amusing!  And I guess you have to be a fan of (or just know about) the sci-fi series “Battlestar Galactica” to even appreciate that.

It towed well just on the ball, but we will get an equalizer hitch to use going forward.

He said the exterior is in good shape, except where the clear coat has failed of course.   No major dents or dings, which we already knew, but that can affect the value of an older Airstream.  Similarly, the interior was deemed to be in good condition “except for the tambours”, which we already knew, as they are mostly missing.  It originally had tambour doors on all the overhead and under-bunk storage areas, plus the kitchen cabinets under the counter.  But those mostly fall apart with time on all the older trailers.  However, I know a woodworker who can make new ones….someday.

They will do a thorough check-out of all systems, but it seems likely we will want to update the water heater and power inverter to modern standards.  He said the old transformer is what is causing a buzzing noise we can hear when plugged into shore power.  Also it may not provide a steady 12V.  The vent fan in the “living room” is kaput, which we knew, and we are going to have them put in a Fantastic Fan instead.  This will mean sacrificing the original ceiling light which is part of the vent unit.  But they can come up with something else for lighting and we would really like to have the newer fan (we have one in the Aliner and it is great – works both ways, either drawing in cool air or expelling warm air).

Why yes….

I have been weaving.

Rick and I are exhibiting our work at the Lost Rivery Winery tasting room in Winthrop from mid-June to mid-September.  Toward that end, I have been trying to build inventory!  Down at the weaving guild room, on my 40″ Macomber, I wove another set of undulating twill towels, 13 out of a 12-yard warp.

These were the first four, I am not sure I ever put up a picture of them finished:

soft gray stripe Apr 2013

and these are the ones I just finished:

turq. stripe Apr May 2013

At home on the 32″ Mac, I wove another round of placemats on a blue warp.  I got 17 out of a 12-yard warp.  Eight of the ones on the left, and eight of the ones on the right, plus one other I did with a different fabric but did not get a picture.  Four of the ones on the right have been donated for a fundraising “gala evening” and auction on July 13 for Confluence Gallery & Art Center in Twisp.

blue warp May 2013

This week on the 48″ Mac at home, I finished 3 rugs that are the ones I really wanted to do for the Lost River Winery exhibit.  I finished the third one around 10 pm last night, and today hemmed and washed them, so they are drying as I write this.

We set up the exhibit at the winery tasting room this morning and it looks good.  I hung 3 rugs as temporary place-holders for the ones drying now, and on Saturday we will go up and swap them out.  I will get pictures then.  Rick brought up his entry table made from the beautiful western bigleaf maple log, and he has a wine cabinet underway that won’t be finished for another week or so.

Airstream update: Rick took the propane tanks up to Okanogan County Energy (our electric and propane suppliers) and had new valves put on the tanks so they conform to current standards.  Then we had the propane technician come by yesterday and check all the gas appliances in the trailer.  Everything works!!  Water heater, 4 burner cook-top, wall oven and refrigerator/freezer in propane mode.

Tomorrow we tow it to Spokane to the Airstream dealership for a checkover and possible repair of some things, depending on what they find and how much it costs.  We will leave it there for several weeks.

 

The last couple of weeks have passed in a whirlwind of activity.  It was all for the good, but still kind of intense.

My dad decided to move from his home near Anacortes to a retirement inn located in La Conner, and set a 2-week timeframe to  do it.  Moving Day was set for May 31.

Initially, Rick and I went over with truck and cargo trailer and helped him do a lot of sorting and packing, things he was taking with him and things he wanted to get rid of (he wanted to empty the house).  We hauled a load of furniture back to the valley that he would no longer have room for, and that we would love to have.  Then we rented a storage locker in Winthrop and moved some of our things there, as this involved a change-out of our living room furniture.

My sister from Colorado, my brother and sister-in-law from Camano, and Rick and I converged on Anacortes on May 30 and we were all there for the big event – Moving Day!  Dad had hired a mover but it still took all of us to do the last minute organizing and packing, setting more things aside for Goodwill or equivalent, and then the unpacking at the other end.  But it went very well and we got a lot done in just a couple of days.

Here we are, tired but happy, at dinner that evening in La Conner:

Moving Day - May 31, 2013

Moving Day – May 31, 2013

During the week we were at home between Packing Day and Moving Day, I had some appointments and shopping errands to do in Wenatchee (about 100 miles from home, so I try to organize as many things into one trip as possible).  On the way home, I passed a vacant lot on the outskirts of Twisp where people put vehicles for sale by owner.  There was an Airstream trailer that looked to be in decent shape, so I peeked through the windows and was sufficiently intrigued to tell Rick about it when I got home.

Now, I have been saying for years that “some day” I wanted to have an Airstream trailer for when we are able to take longer trips to see more of the USA and Canada. Or maybe take it south for “winter breaks” of a month or two.  We have looked at new ones and I have studied the floor plans.  But I really knew that we wouldn’t be able to afford one – even used ones at dealerships (10 years old or younger) are pretty spendy.  I figured that a bigger trailer than our pop-up camping trailer, with more room and amenities (a bathroom!) would be in our future, but not an Airstream.

Anyway, long story made short, we met the sellers that evening and looked it over.  It is a 1973 International Overlander (the latter meaning the 27′ long model).   It looked pretty good and the price was WAY right.  We decided the next morning to go for it (this was the morning we were leaving for Anacortes).  It turned out there was another interested party that had made an offer the night before, so we had to counter somewhat, but in the end it was ours and we agreed to meet with them after we got back from Moving Day to close the deal.

Sorry, dear family, for springing this on you!  It all happened so fast and then we were embroiled in moving.  We just put it out of our minds over the weekend.

So this past Monday, we closed the deal.  Tuesday morning we got the new license plate and tabs and registration.  The first thing we did is tow it 2 blocks to Coyote Ridge Automotive and get a new wiring harness put in that is wired directly for the receptacle on the truck.  The trailer had some kind of old 7-prong plug that we had no adapter for (neither did the sellers, and the tabs hadn’t been renewed since May 2006 – they had used it as a “guest cabin” – but how they towed it without turn signals etc I don’t want to know).  Anyway all the exterior lights (brake, turn, running) and the electric brakes are in good working order.  Then we brought it home:

as found 1

as found 2

This is going to be a Project that we will work on for a couple of years.  We took it on faith that “everything works” except for the air conditioner, but we are taking it over to Airstream of Spokane at the end of next week for a check-over.  The interior is in pretty decent shape, although very 1970’s (can you say “orange formica”?)  The carpet is tatty and we will probably put down Marmoleum (old style linoleum) eventually.  The windows have a film between the 2 layers of glass that has cracked and glazed, so that will be our major project.  We have already found a lot of info on the web about removing and renovating the windows, including new window tint film.  In fact, the DIY (Do It Yourself) Channel had a 10-part series a couple of years ago where they completely restored a 1970 Airstream, and they are available online as YouTube videos.

At 27′ it is probably the longest model I would have considered (new or old) – a 25′ would have been my ideal – or even a 23′ would have worked.  But when you are inside it sure feels comfortable, and there is a ton of storage.  So for long trips or staying one place for an extended period, it should be great.

Stay tuned for periodic Airstream postings with before and after pictures!

As for the title of this post:  we celebrated our 40th wedding anniversary this year – March 17, 1973.  This being a 1973 Airstream, I told Rick this must mean the 40th anniversary is the “Aluminum Anniversary”!

A little over a week ago, we were able to borrow back our little John Deere tractor, “Deere Prudence”, from the guy who bought it when we moved from Benson Creek about 3 years ago.  We had a few projects to do around here that required some heavy lifting.

Last Sunday Rick fetched some rocks which were originally pulled out of the alfalfa fields, and now line an S-curve about a quarter mile up the Wolf Creek Rd.  We of course asked permission to take them, and they were more than happy to get rid of some of them, although we barely made a dent.  We will be using these in the area in front of the house where we want to do a little landscaping – mostly grasses and perennials.

P1020621

P1020623

P1020625

P1020628

The last couple of days, Rick has also used the tractor to haul what remains of our pile of gravel over to where he can spread it around the perimeter of the deck.  And yesterday he also used it with some chains to pull up some small pines and bitterbrush that were growing in the right-of-way along our section of the community road.  There has also been some miscellaneous cleanup of areas where we had burn piles in the last, and hauling some piles of small rocks to an area where we are going to create a rock mound.

So handy – but she is going away again this weekend.  As are we – heading to the Coast for Mothers’ Day, seeing friends, and visiting my Dad up in Anacortes.

Shopcam: Bigleaf Maple

Over the winter, Rick agreed to make pieces for 3 different shows in the valley this summer, on top of his regular workload.  He was thinking that the first one didn’t open until mid-June.  So it was a bit of a shock when we read the Methow Valley News Summer Guide about 3 weeks ago, and realized that the Garden Art Show at the Methow Valley Inn in Twisp opens this coming weekend – May 12th.

So he went to work on some ideas he has for working with some beautiful wood that has been in the stash for years.  It is Western Bigleaf Maple with lots of character and live edges.  He got it about 10 years ago from a woodworker friend in North Bend, WA, and the friend in turn had it for 17 years (we think).  So the wood was milled and dried for about 25 years, possibly longer. When the pieces were milled out, sanded and finished grain patterns emerged that amazed both of us.

The first piece is this bench, which will go into the Garden Art Show:

bench 1

bench 2

It has a natural curve on one edge, which makes for a very comfortable seat.  There is another matching board, not quite as curved, that will become a second bench when he gets time!

Next he went to work on a small table using two matched planks.  It seemed like a natural thing, since he wanted to retain the live edges and all the character in the wood as much as possible, to have the split down the middle – the live edges approach each other but do not quite meet.  The base is similar to the one for the bench, but the stringer runs at a bit of a diagonal because on each leg, one side is wider than the other, and the narrower side is on the left on one leg, and on the right on the other leg.

table 1

table 2

table 3

This table will be shown at the Inside Out show (“an exploration and celebration of designed interior and exterior space, and the objects and forms we use to define them”) which will run from August 3 – September 21 at Confluence Gallery & Art Center in Twisp.

Next up:  a hall table using this beautiful top, which he actually constructed by cutting 2 boards along a diagonal and then gluing together.  That diagonal looks like a fault line running the length of the top. The 2 pieces were cut off of the pieces used to make the benches –  there was a split (or crotch) and these pieces were separate branches.  When removed from the larger slabs they were about two inches wide at one end and nine inches wide at the other end, with a big knot.  Rick thought they would be waste but then realized he could join them end for end and came up with a nine foot long slab with great grain and shape.

hall table top

This is not the base for the hall table!  Just something to set it on for the picture.  He has an idea, but these things more or less develop as he goes along making them.

The hall table and one other yet-to-be determined piece will be for an exhibit at the Lost River Winery tasting room in Winthrop (they also have a tasting room at the north end of the Pike Place Market in Seattle).  They will be featuring both of our work there for 12 weeks, mid-June through mid-September.  I am calling it “Wine, Weaving & Woodwork”.  So we both have a lot to do to get ready for that!

So far, Rick has used only about a third of the lumber from this tree so there is still the potential for quite a few more pieces.